Recorded: March 15, 2018 The OASIS DITA Adoption TC is pleased to announce Keith Schengili-Roberts presentation on DITA Worst Practices. While people are interested in hearing about successes, we can actually learn more from failure. Not only do we discover what not to do, but also how to avoid the circumstances that led to it. DITA Adoption Chairperson Keith Schengili-Roberts has seen a lot of good and bad things happen to DITA implementations over the years, and part of his job is to investigate what works, what doesn’t, and why. This presentation is designed as an instructive and humorous lesson on what *not* to do when implementing DITA within a documentation team. From constraints that went too far, management decisions that went awry to quixotic tool decisions, Keith will cover DITA tales that are both funny and horrifying. Listen to his best (worst) DITA practices! Presented by: The OASIS DITA Adoption Technical Committee Keith Schengili-Roberts, OASIS DITA Adoption Committee Chairperson / IXIASOFT Keith is a DITA Specialist at IXIASOFT, DITA evangelist and technical writing nerd. Keith is also an award-winning lecturer on Information Architecture at the University of Toronto's iSchool, and Durham College. He is also an active member of the OASIS DITA Technical Committee, and can often be found presenting at conferences, working with customers, and researching how DITA is being used and sharing those results with the DITA community. Keith's popular industry blog DITAWriter.com has become a focal point on DITA resources and best practices. Connect with Keith on Twitter @KeithIXIASOFT.
September 17, 2019 When your users can’t easily find your information online, they may turn to the competition. When your writers can’t find the content they need, they will recreate it. And, when your organization doesn’t have a common strategy to identifying information across the enterprise you are wasting valuable resources as they search to find needed information. Whether in document properties, a keyword spreadsheet or within your content management systems, metadata is a key to findability. Learn how a metadata strategy adopted by all the content creators can make it easier for everyone inside and outside your organization to find the information they need. Presented by: Todd Burdin is a senior solution architect and strategic business consultant with 25+ years of software development and business consulting expertise, encompassing the entire content development lifecycle. He has extensive experience delivering innovative enterprise solutions for content management, structured authoring, and publishing to a diverse set of industries, including equipment manufacturers, pharmaceuticals, legal mediations, hospitals, and financials. Todd has worked at Oberon Technologies for 6+ years. Previous employers include PTC, Arbortext, Entrusted Solutions, and First Consulting Group.
September 19, 2019 No matter where and how you author your content today – Word, InDesign, XHTML, Markdown, DITA, FrameMaker, and more – offering an immersive experience to your customers is the need of the hour. If you are still publishing your content as static PDFs only, you are depriving them of a rich and rewarding consumption experience full of unique possibilities. With the right digital experience solution, you can plug-in data insights to design, manage and deliver consistent, personalized and targeted content for every single customer. Join us in this webinar to see how an integrated solution can help you:
- Move from publishing static PDFs only to delivering immersive, fluid experiences throughout the customer journey
- Leverage next-generation capabilities like personalization, analytics, and targeting
- Still be able to publish to other popular formats at will – HTML5, Mobile Apps, EPUB, KINDLE and more
Recorded: February 26, 2018 Although you don’t need DITA to write according to minimalism principles and you can certainly take a non-minimal approach when writing in DITA, the two go together like chocolate and peanut butter. In this presentation, Dawn explores the relationship between DITA, minimalism, and other technical communication best practices, demonstrating how each aligns with and complements the other. She provides guidance for forming your DITA information model and authoring guidelines to reflect writing best practices while maximizing the benefits DITA offers. Presented by: Dawn Stevens, Comtech Services at LearningDITA Live 2018 Dawn Stevens is President of Comtech Services, a content-management and information-design firm based in Denver, Colorado. She is also Director of the Center for Information-Development Management, a membership organization focused on content-management and information-development best practices. With over 25 years of experience, including 15 years at Comtech, Dawn has practical experience in virtually every role within a documentation and training department, including project management, instructional design, writing, editing, and multimedia programming. With both engineering and technical communication degrees, Dawn combines a solid technical foundation with strong writing and design skills to identify and remove the challenges her clients face in producing usable, technical information and training.
April 1, 2020 Implementing DITA with a small team of technical writers does not have to be expensive or difficult to set up. We'll go through the steps of implementing a DITA solution using GitHub for storage and workflow and Oxygen XML Editor for editing. We'll also look into how you can automate publishing and receive feedback from your end users. As a practical example we'll look into how editing, collaboration and publishing on the Oxygen XML Blog works. Presented by: Radu Coravu started working more than 10 years ago as a software developer for Syncro Soft SRL, the manufacturer of the popular oXygen XML Editor. During the last years, his main focus has been in the development of the visual XML Author editing environment and the specific-DITA support provided by oXygen. He provides support for complex integrations and helps steer the product in the right direction, all this with some development on the side.
August 28, 2019 Looking for a single piece of content on a web site is often compared to digging in a giant bucket of LEGOs for a single unique piece – an often frustrating and futile endeavor. If those LEGOs are sorted by certain distinguishing attributes, such as color and size, the odds of finding a particular piece increase dramatically. As a result, companies often take a “LEGO-block” approach to their information taxonomies. However, the sorting of LEGO blocks is child’s play, compared to the intricacies of sorting technical content – the distinctions are not always as visible as color or size, and attributes that are that obvious may not be very useful in a search. Nevertheless, there are lessons we can learn from the “LEGO-block” approach. In this session, Dawn draws parallels between sorting LEGOs and sorting technical content, and provides suggestions for going deeper when the Lego model falls short. Presented by: Dawn Stevens is the President, and owner of Comtech Services and the Director of the Center for Information-Development Management. With over 25 years of experience, including 15 years at Comtech, Dawn has practical experience in virtually every role within a documentation and training department, including project management, instructional design, writing, editing, and multimedia programming. With both engineering and technical communication degrees, Dawn combines a solid technical foundation with strong writing and design skills to identify and remove the challenges her clients face in producing usable, technical information and training.
September 16, 2020 Tools and techniques used in software development can also be applied for documentation management:
- Storage and issue management using GitHub
- Automated quality checks and continuous publishing using Netlify
- Editing and collaboration support
- Release strategies
Date: October 2, 2019 Prior to DITA, there wasn’t much we could do when it came to strategizing with the rest of the enterprise and pooling our tools, processes, and content. That’s no longer the case; as we see more and more DITA adoption from many expected and unexpected divisions, from Training and Support to Academic Publishers, Operations and Insurance. A unified, DITA-driven, enterprise-wide approach to content can have a profound impact on the enterprise. When content created by the enterprise is treated as a valued and valuable corporate asset, it’s a win-win-win situation. It’s more efficient for the enterprise and easier for content creators. But end users reap the real benefit by getting the content they need when they need it. In this webinar, Bernard Aschwanden, will take you through 10 ways in which DITA can help drive unified content strategy. Presented by: Bernard solves documentation-based problems and helps companies generate more revenue. He guides clients through the best processes to create, manage, and deliver content. Once content is delivered, he helps socialize the message, understand and act on feedback, and improve the process and workflow. He is the founder of Publishing Smarter (www.publishingsmarter.com), an Associate Fellow of STC, and a Past President of STC. Bernard has helped hundreds of companies implement successful solutions. He is focused on publishing better, publishing faster, and publishing smarter.
May 13, 2020 There is an explosion of content today. But what makes your content stand out is – relevance and searchability. To ensure that customers don’t have to spend hours searching through your content, metadata is key. And to know what metadata to add while authoring, a well-established taxonomy is key. To design a truly best-in-class content search experience metadata and taxonomy need to work in tandem. In this webinar we will showcase:
- How to leverage metadata to make your content searchable
- What is the difference between good and bad taxonomies
- A live example of taxonomy development using Adobe Experience Manager
Date: July 11, 2019 Content needs to be delivered across multiple channels – printed documents, website, mobile app, chat bots, customer support website, IoT devices, and beyond – but needs to be relevant to end users in context of their search. However, end users struggle to find the right content easily as authors are always short of time to create content best suited for all these needs. Content needs to be served up on demand almost like a service which works no matter the device, channel and context in which it is viewed. It all comes down to structure. Find out how you can make your content ‘future ready’ by following some intelligent techniques. Key takeaways:
- How to make your content intelligent?
- How to make your content channel agnostic?
- How structured content can help achieve these objectives?
Date: August 7, 2019 Gathering feedback from subject matter experts and other stakeholders is frequently a source of frustration for both content developers and SMEs alike. Whether you use the old “red pen” technique or circulate PDFs to your SMEs for comment and review, incorporating that feedback into your source content is time-consuming, labor-intensive, and error prone – not to mention difficult to track over time. In this webinar Chad Dybdahl, Adobe Solutions Consultant, will walk you through a highly collaborative workflow experience that allows you to:
- Easily collect feedback from many stakeholders simultaneously, in real-time
- Quickly import changes from reviewers back into your DITA source content
- Accept and reject whose changes
- Preserve trackability of the changes throughout the content lifecycle
May 12, 2020 In its eighth year of collecting data, the Center for Information-Development Management (CIDM) and Data Conversion Laboratory (DCL) asked managers, information architects, writers, training developers, and more how they are addressing the challenges of meeting customer information needs. During the webinar we walk through the results of the 2020 Trends Survey, a study we have been conducting since 2012. We trace the changes in how we think about developing and delivering content. Learn how others in the information-development community are planning to respond to new customer demands for innovative approaches to development and delivery. Presented by: Dawn Stevens, President, Comtech Services and Director of CIDM has 28 years of practical experience in virtually every role within a documentation and training department, including project management, instructional design, writing, editing, and multimedia programming. Dawn is the perfect advisor to identify and remove the challenges you face in producing usable, technical information and training content. With both engineering and technical communication degrees, Dawn combines her solid technical foundation with strong writing and design skills to lead our team of consultants and specialists in providing the expertise you need. Mark Gross, President, Data Conversion Laboratory, is a recognized authority on XML implementation and document conversion. Mark also serves as Project Executive, with overall responsibility for resource management and planning. Prior to joining DCL in 1981, Mark was with the consulting practice of Arthur Young & Co. Mark has a BS in Engineering from Columbia University and an MBA from New York University. He has also taught at the New York University Graduate School of Business, the New School, and Pace University. He is a frequent speaker on the topic of automated conversions to XML and SGML.