Past Webinars

  • Recorded: March 15, 2018 The OASIS DITA Adoption TC is pleased to announce Keith Schengili-Roberts presentation on DITA Worst Practices. While people are interested in hearing about successes, we can actually learn more from failure. Not only do we discover what not to do, but also how to avoid the circumstances that led to it. DITA Adoption Chairperson Keith Schengili-Roberts has seen a lot of good and bad things happen to DITA implementations over the years, and part of his job is to investigate what works, what doesn’t, and why. This presentation is designed as an instructive and humorous lesson on what *not* to do when implementing DITA within a documentation team. From constraints that went too far, management decisions that went awry to quixotic tool decisions, Keith will cover DITA tales that are both funny and horrifying. Listen to his best (worst) DITA practices! Presented by: The OASIS DITA Adoption Technical Committee Keith Schengili-Roberts, OASIS DITA Adoption Committee Chairperson / IXIASOFT Keith is a DITA Specialist at IXIASOFT, DITA evangelist and technical writing nerd. Keith is also an award-winning lecturer on Information Architecture at the University of Toronto's iSchool, and Durham College. He is also an active member of the OASIS DITA Technical Committee, and can often be found presenting at conferences, working with customers, and researching how DITA is being used and sharing those results with the DITA community. Keith's popular industry blog DITAWriter.com has become a focal point on DITA resources and best practices. Connect with Keith on Twitter @KeithIXIASOFT.
  • September 17, 2019 When your users can’t easily find your information online, they may turn to the competition. When your writers can’t find the content they need, they will recreate it. And, when your organization doesn’t have a common strategy to identifying information across the enterprise you are wasting valuable resources as they search to find needed information. Whether in document properties, a keyword spreadsheet or within your content management systems, metadata is a key to findability. Learn how a metadata strategy adopted by all the content creators can make it easier for everyone inside and outside your organization to find the information they need. Presented by: Todd Burdin is a senior solution architect and strategic business consultant with 25+ years of software development and business consulting expertise, encompassing the entire content development lifecycle. He has extensive experience delivering innovative enterprise solutions for content management, structured authoring, and publishing to a diverse set of industries, including equipment manufacturers, pharmaceuticals, legal mediations, hospitals, and financials. Todd has worked at Oberon Technologies for 6+ years. Previous employers include PTC, Arbortext, Entrusted Solutions, and First Consulting Group.
  • September 19, 2019 No matter where and how you author your content today – Word, InDesign, XHTML, Markdown, DITA, FrameMaker, and more – offering an immersive experience to your customers is the need of the hour. If you are still publishing your content as static PDFs only, you are depriving them of a rich and rewarding consumption experience full of unique possibilities. With the right digital experience solution, you can plug-in data insights to design, manage and deliver consistent, personalized and targeted content for every single customer. Join us in this webinar to see how an integrated solution can help you:
    • Move from publishing static PDFs only to delivering immersive, fluid experiences throughout the customer journey
    • Leverage next-generation capabilities like personalization, analytics, and targeting
    • Still be able to publish to other popular formats at will – HTML5, Mobile Apps, EPUB, KINDLE and more
    Presented by: As Senior Solution Consultant at Adobe, Divraj Singh lead consulting for Adobe’s CCMS offering – XML Documentation for Adobe Experience Manager. Divraj has over 12 years of software development and technical management experience. He is seasoned expert in the field of content management with experience of working on various WCMS systems and enterprise solutions. He has worked on various software products spanning different technologies involving mobile-web, analytics, personalization, social applicable to several domains like finance, marketing, retail and healthcare.
  • Recorded: January 18, 2017 Proponents argue that organizations adhering to an Agile methodology are better positioned to meet the needs and expectations of their customers, react to market needs and changes, and realize the greatest value from their resources. As a growing number of information development teams jump on the Agile bandwagon, with or without their product development teams, they must evaluate whether or not Agile meets its promises. However, traditional waterfall metrics tend to measure process and productivity, such as ensuring a defined workflow has been followed or calculating development hours per page or topic. Agile benefits, however, center less on how things were done and more on the resulting outcome, such as customer satisfaction or team collaboration.  Managers need to adapt and change what they are measuring to obtain a complete picture of what they are accomplishing with their move to Agile. Presented by: Dawn Stevens, Comtech Services Inc. Dawn Stevens is Vice President of Operations and partner at Comtech Services and Associate Director of the Center for Information-Development Management. With over 25 years of experience, including 15 years at Comtech, Dawn has practical experience in virtually every role within a documentation and training department, including project management, instructional design, writing, editing, and multimedia programming. With both engineering and technical communication degrees, Dawn combines a solid technical foundation with strong writing and design skills to identify and remove the challenges her clients face in producing usable, technical information and training.
  • Recorded: May 24, 2016 There’s a joke going around that asks: where’s the best place to hide a dead body? Answer: on the second page of a Google search. It underscores the fact that if your technical content does not appear at or near the top of what your users are searching for, it might as well not exist. You can mitigate the problem in DITA content by devising an effective taxonomy and inserting effective metadata into your topics. IXIASOFT DITA Specialist Keith Schengili-Roberts has explored this topic and presents his findings on the processes that can be used to make your DITA-based content easy for your users to find. Presenter: Keith Schengili-Roberts, IXIASOFT Keith is a DITA Specialist at IXIASOFT, DITA evangelist and technical writing nerd. Keith is also an award-winning lecturer on Information Architecture at the University of Toronto's iSchool, and Durham College. He is also an active member of the OASIS DITA Technical Committee, and can often be found presenting at conferences, working with customers, and researching how DITA is being used and sharing those results with the DITA community. Keith's popular industry blog DITAWriter.com has become a focal point on DITA resources and best practices. Connect with Keith on Twitter @KeithIXIASOFT.
  • Recorded: August 24, 2017 This is the second webinar from the DITA Adoption Committee, which seeks to educate the global marketplace on the value of DITA for document creation and management. View our extensive set of whitepapers on DITA best practices, and follow us on Twitter: @DITA_Adoption.

    Presented by: Keith Schengili-Roberts, OASIS DITA Adoption Chair / IXIASOFT

    Keith is a DITA Information Architect at IXIASOFT, DITA evangelist and technical writing nerd. Keith is also an award-winning lecturer on Information Architecture at the University of Toronto?s iSchool, and Durham College. He is also an active member of the OASIS DITA Technical Committee, and can often be found presenting at conferences, working with customers, and researching how DITA is being used and sharing those results with the DITA community. Keith's popular industry blog DITAWriter.com has become a focal point on DITA resources and best practices. Connect with Keith on Twitter @KeithIXIASOFT.
  • Recorded: September 21, 2017 User guides, technical and reference manuals, installation and maintenance manuals aren’t merely the documentation of your products—they are also tools for winning business, increasing customer satisfaction and building loyalty. By understanding how your product documentation is consumed, you can transform operations and improve your product adoption. To gain this insight, you need to change the way you track and mine the behavior of users when they search, read and interact with your technical content. By combining the latest delivery, text-mining and analytics technologies, you will transform tech content into a sensor and its delivery into a data generator, unleashing a tremendous potential of information innovation.

    Presented by: Fabrice Lacroix, Antidot

    Fabrice Lacroix is a known Web pioneer and the founder of Antidot, the company that puts enterprise content to work. As an entrepreneur, he has been working for 25 years on the development of the Internet and of the Web through several major companies.
  • Recorded: August 10, 2017 For many manufacturers, the service (after-market) business is becoming more important as they are looking to improve customer satisfaction and service-related profitability. However, the cost of service has proven to be very high and maintenance issues are often dealt with inefficiently; a service engineer often still needs to go onsite to inspect the problem, order spare parts and then go back a second time to perform the actual maintenance.  Moreover, research found that it takes a service engineer up to 50% to troubleshoot an issue as maintenance information is either difficult to find, use or understand due to the way it’s delivered, for instance in the form of complex and ambiguous content in lengthy PDF files. Through smart, connected products thanks to Industrial Internet solutions, manufacturers and service organizations will be able to collect, analyze and capitalize on the data gathered from the use of their products: from early problem identification to predictive maintenance to generating new revenue streams. During this 45 min session Berry Braster will discuss how a solid content strategy (allowing for dynamic and augmented service information delivery) combined with IoT strategies will improve the profitability in the service business in both the short and long term.

    Presented by Berry Braster, Etteplan

    Berry Braster is the Technology Director of Technical Documentation at Etteplan, a specialist in engineering, embedded systems, IoT, and technical documentation solutions with over 2500 employees worldwide. Berry has over 16 years of experience in the field of technical documentation and has assisted many global companies with their content strategies, how to effectively communicate technical information and apply universal standards for content, including Simplified Technical English and DITA.
  • Recorded: February 26, 2018 Although you don’t need DITA to write according to minimalism principles and you can certainly take a non-minimal approach when writing in DITA, the two go together like chocolate and peanut butter. In this presentation, Dawn explores the relationship between DITA, minimalism, and other technical communication best practices, demonstrating how each aligns with and complements the other. She provides guidance for forming your DITA information model and authoring guidelines to reflect writing best practices while maximizing the benefits DITA offers. Presented by: Dawn Stevens, Comtech Services at LearningDITA Live 2018 Dawn Stevens is President of Comtech Services, a content-management and information-design firm based in Denver, Colorado. She is also Director of the Center for Information-Development Management, a membership organization focused on content-management and information-development best practices. With over 25 years of experience, including 15 years at Comtech, Dawn has practical experience in virtually every role within a documentation and training department, including project management, instructional design, writing, editing, and multimedia programming. With both engineering and technical communication degrees, Dawn combines a solid technical foundation with strong writing and design skills to identify and remove the challenges her clients face in producing usable, technical information and training.
  • Recorded: May 11, 2017 Improved efficiency is often considered the primary benefit of content reuse. While reusable content can facilitate increased authoring and translation efficiencies, implementing a component content management system designed around enabling reuse can also significantly improve content quality, which contributes to an exceptional customer experience.
    Learn how Waters Corporation enhances their customer experience by using SDL Knowledge Center to align its processes, drive content reuse, and standardize its information products.

    Presented by Joshua Steen, Waters Corporation

    Joshua Steen is the Process and Technology Manager at Waters Corporation where he oversees the content management technologies, content production policies and processes, and content migration initiatives for the Customer Experience and Knowledge Management department. For over 50 years, Waters has developed innovative analytical science solutions to support customer discoveries, operations, performance, and regulatory compliance. Josh has a Master's degree in Technical and Professional Writing from Northeastern University. Prior to joining Waters five years ago, Josh was the Documentation and Training Development Manager at McKesson Corporation, supporting healthcare management and claims processing software applications.
  • Recorded: January 12, 2017 DITA 1.3 introduces scoped keys, which expand the key functionality introduced in DITA 1.2. In DITA 1.2, a key could have only one definition with a root map. This limitation proved a barrier to a fully-realized reuse strategy for many documentation teams. Scoped keys enable a key to be redefined at multiple levels (key spaces) in a map, with each key definition effective within its own key space. A key space can be the entire root map, a sub-map, a topichead or topicgroup, or even a single topicref, meaning (for one thing) that a topic can be reused many times in a map with its keys being resolved different in each instance of the topic. The scoped keys functionality makes use of a new keyscope attribute added to the appropriate map node. This attribute is not required; unscoped keys can still be used and continue to function as they did in DITA 1.2. This webinar explains the evolution of keys between DITA 1.2 and DITA 1.3, and presents several basic examples and use cases for scoped keys. It also explains key spaces and the interaction between multiple key spaces in a map. During this webinar, the presenter will use the oXygen XML editor with the understanding that other XML editors might choose to visually represent the scoped key functionality differently. Presented by: Leigh W. White, IXIASOFT Technologies Leigh is a DITA Specialist at IXIASOFT, where she helps documentation groups evaluate their workflows and content models and transition into the DITA CCMS. Leigh has spoken on DITA, content management systems and content conversion at a number of conferences, including DITA North America, DITA Europe, Intelligent Content, DITA-OT Day, the STC Summit, Lavacon, and Writers UA. She is the author of DITA For Print: A DITA Open Toolkit Workbook and a contributor to The Language of Content Strategy and The Language of Technical Communication.
  • Date: October 2, 2019 Prior to DITA, there wasn’t much we could do when it came to strategizing with the rest of the enterprise and pooling our tools, processes, and content. That’s no longer the case; as we see more and more DITA adoption from many expected and unexpected divisions, from Training and Support to Academic Publishers, Operations and Insurance. A unified, DITA-driven, enterprise-wide approach to content can have a profound impact on the enterprise. When content created by the enterprise is treated as a valued and valuable corporate asset, it’s a win-win-win situation. It’s more efficient for the enterprise and easier for content creators. But end users reap the real benefit by getting the content they need when they need it. In this webinar, Bernard Aschwanden, will take you through 10 ways in which DITA can help drive unified content strategy. Presented by: Bernard solves documentation-based problems and helps companies generate more revenue. He guides clients through the best processes to create, manage, and deliver content. Once content is delivered, he helps socialize the message, understand and act on feedback, and improve the process and workflow. He is the founder of Publishing Smarter (www.publishingsmarter.com), an Associate Fellow of STC, and a Past President of STC. Bernard has helped hundreds of companies implement successful solutions. He is focused on publishing better, publishing faster, and publishing smarter.
  • Recorded: August 23, 2016 Standards are as old as human societies: their forebears are the coins and weights that were used for trade as far back as the historical record goes. In this presentation, JoAnn Hackos explains how information development managers can adopt standards that are relevant for our world. Know how standards demonstrate that we are part of a worldwide community dedicated to ensuring that we define and adopt recognized best practices. Learn how we can work together globally to ensure that we define and implement best practices to develop information and deliver it effectively. Dr. Hackos explains which standards are available and which are under development. She will help you learn how you can benefit from standards in your company or organization. Presented by: JoAnn Hackos, Comtech Services, Inc. Dr. JoAnn Hackos is President of Comtech Services, a content-management and information-design firm based in Denver, Colorado, which she founded in 1978. She is Director of the Center for Information-Development Management (CIDM), a membership organization focused on content-management and information-development best practices. Dr. Hackos and colleagues are called upon by corporate executives worldwide to consult on strategies for content management, development and organizational management, product interface design, customer studies, Web and traditional information architecture, and tools and technology selection.
  • Recorded: November 30, 2016 DITA short descriptions have gotten a bad rap over the years, and what was designed to be an essential tool to help technical writers craft better topics and aid readers to narrow down their search for the right content, is perceived by many to be a chore or an afterthought. IXIASOFT DITA Specialist, Keith Schengili-Roberts and JANA Inc.'s Senior Structured Data Analyst, Joe Storbeck got together and wrote an OASIS white paper how and why crafting effective short descriptions are among the most important things a DITA-based technical writer can do. Keith and Joe will examine how to write effective short description for concepts, references and troubleshooting topic types as well as for maps and APIs. This presentation will cover why short descriptions are a good idea (really!), how they make finding content easier for readers, can increase the SEO for your online documents, and much more. If you are looking to understand why short descriptions are important and how to craft them properly, don’t miss this presentation! Presented by: Keith Schengili-Roberts, IXIASOFT and Joe Storbeck, JANA Keith Schengili-Roberts is a DITA Specialist at IXIASOFT, DITA evangelist and technical writing nerd. Keith is also an award-winning lecturer on Information Architecture at the University of Toronto’s iSchool, and Durham College. He is also an active member of the OASIS DITA Technical Committee, and can often be found presenting at conferences, working with customers, and researching how DITA is being used and sharing those results with the DITA community. Keith's popular industry blog DITAWriter.com has become a focal point on DITA resources and best practices. Connect with Keith on Twitter @KeithIXIASOFT. Joe Storbeck has been a technical communication professional for over 30 years, and has an extensive background in the development of structured data and data application methodologies. He has led technical documentation teams for some of the world’s largest and most successful companies, including IBM, Citibank and AIG, and now leads the DITA consultation and development team for San Antonio, Texas based JANA, Inc. Joe is also a member of the following OASIS committees that are charged with the development, maintenance, and promotion of DITA: DITA Technical Committee, DITA Technical Communications Subcommittee, DITA Adoption Technical Committee, and Lightweight DITA Subcommittee.
  • August 28, 2019 Looking for a single piece of content on a web site is often compared to digging in a giant bucket of LEGOs for a single unique piece – an often frustrating and futile endeavor. If those LEGOs are sorted by certain distinguishing attributes, such as color and size, the odds of finding a particular piece increase dramatically. As a result, companies often take a “LEGO-block” approach to their information taxonomies. However, the sorting of LEGO blocks is child’s play, compared to the intricacies of sorting technical content – the distinctions are not always as visible as color or size, and attributes that are that obvious may not be very useful in a search. Nevertheless, there are lessons we can learn from the “LEGO-block” approach. In this session, Dawn draws parallels between sorting LEGOs and sorting technical content, and provides suggestions for going deeper when the Lego model falls short. Presented by: Dawn Stevens is the President, and owner of Comtech Services and the Director of the Center for Information-Development Management. With over 25 years of experience, including 15 years at Comtech, Dawn has practical experience in virtually every role within a documentation and training department, including project management, instructional design, writing, editing, and multimedia programming. With both engineering and technical communication degrees, Dawn combines a solid technical foundation with strong writing and design skills to identify and remove the challenges her clients face in producing usable, technical information and training.
  • Date: July 11, 2019 Content needs to be delivered across multiple channels – printed documents, website, mobile app, chat bots, customer support website, IoT devices, and beyond – but needs to be relevant to end users in context of their search. However, end users struggle to find the right content easily as authors are always short of time to create content best suited for all these needs. Content needs to be served up on demand almost like a service which works no matter the device, channel and context in which it is viewed. It all comes down to structure. Find out how you can make your content ‘future ready’ by following some intelligent techniques. Key takeaways:
    • How to make your content intelligent?
    • How to make your content channel agnostic?
    • How structured content can help achieve these objectives?
      Presented by: As Senior Solution Consultant at Adobe, Divraj Singh lead consulting for Adobe’s CCMS offering – XML Documentation for Adobe Experience Manager. Divraj has over 12 years of software development and technical management experience. He is seasoned expert in the field of content management with experience of working on various WCMS systems and enterprise solutions. He has worked on various software products spanning different technologies involving mobile-web, analytics, personalization, social applicable to several domains like finance, marketing, retail and healthcare.
  • Recorded: March 28, 2018 As we look forward to the 2018 Content Management Strategies/DITA North America conference in April, we devote time to identify industry trends. We asked managers, information architects, writers, training developers, and more how they are addressing the challenges of meeting customer information needs. Dawn Stevens, President of Comtech Services and Mark Gross, President, DCL will walk us through the results of the 2018 Trends Survey, a study we have been conducting since 2012. With five years of data, we can trace the changes in how we think about developing and delivering content. Join DCL and Comtech Services as we review the results of the 2018 survey and compare it with past results. Learn how information developers are coping with new customer demands for innovative approaches to development and delivery. Learn what tools teams are using and how they respond to technical innovations. Presented by: Dawn Stevens, Comtech Services and Mark Gross, Data Conversion Laboratory Dawn Stevens is President of Comtech Services, a content-management and information-design firm based in Denver, Colorado. She is also Director of the Center for Information-Development Management, a membership organization focused on content-management and information-development best practices. With over 25 years of experience, including 15 years at Comtech, Dawn has practical experience in virtually every role within a documentation and training department, including project management, instructional design, writing, editing, and multimedia programming. With both engineering and technical communication degrees, Dawn combines a solid technical foundation with strong writing and design skills to identify and remove the challenges her clients face in producing usable, technical information and training. Mark Gross, President, Data Conversion Laboratory, is a recognized authority on XML implementation and document conversion. Mark also serves as Project Executive, with overall responsibility for resource management and planning. Prior to joining DCL in 1981, Mark was with the consulting practice of Arthur Young & Co. Mark has a BS in Engineering from Columbia University and an MBA from New York University. He has also taught at the New York University Graduate School of Business, the New School, and Pace University. He is a frequent speaker on the topic of automated conversions to XML and SGML.
  • April 5, 2018 Content can be created and managed in primarily two different ways – structured, following an XML-based information model or unstructured, without any specific information model. Over the last few years, we have seen a surge in companies (more so in a few particular industries) evaluating or migrating to structured content. • What is the current state of these companies and/or the industries? Did these companies migrate successfully? • Which specific information model did most of these companies choose? Why did they choose what they did? Adobe recently surveyed a diverse group of 2000+ content professionals across 30+ countries to better understand their preferences, usage, and practices around structured content. The results revealed interesting trends in the areas of adoption of structured authoring, structured content management, the journey towards chatbots, and collaboration use cases, to name a few. Join Adobe Tech Comm Evangelist, Stefan Gentz, as he shares the latest insights in structured content management based on the findings from Adobe’s 2017 – 2018 Tech Comm Survey. Presented by: Stefan Gentz, Adobe As the Global Evangelist for Technical Communication at Adobe, Stefan’s mission is to inspire enterprises and technical writers around the world and show how to create compelling technical communication content with the Adobe TCS tools. Stefan is also a certified Quality Management Professional (TÜV), ISO 9001 / EN 15038 auditor, ISO 31000 Risk Management expert and Six Sigma Champion. Stefan is a popular keynote speaker and moderator at conferences such as tekom, tcworld, Information Energy, Intelligent Content Conference, Congility, LocWorld, TCUK, STC, GALA, ELIA, TTT, Translation Forum Russia and many other. He is also a member of the Conference Advisory Board of the world’s biggest TechComm event, the tekom / tcworld Conferences, and an Ambassador for the Globalization and Localization Association. He is also an active social networker on Facebook, Twitter, and LinkedIn.
  • Recorded: December 16, 2015 Case study of Cray Inc. Technical Publications department moving from producing pdfs from 5 different sources to converting to XML DITA and working within a CCMS. From there, content is published to the Pubs portal and available as dynamic content. Geared for anyone in Technical Publications looking to get past creating pdfs in their system. This webinar will briefly cover the conversion and detail the efforts to get to the portal as well as the preparation necessary to accommodate dynamic content. It is assumed attendees are familiar with DITA as an XML model (intimate knowledge is not necessary), are considering implementing XML DITA, or have been working in DITA. Anyone looking for what happens after an XML DITA conversion and what moving forward looks like will gain insights into how to harness the potency of DITA and deliver content in multiple outputs. Presented by: Peggy Sanchez, Cray Inc. Peggy Sanchez is the current Tech Pubs Manager for Cray Inc. She has a degree in Scientific and Technical Communication and a Masters in Management of Technology. She was a tech writer for 10 years and a Pubs manager for 5. She joined Cray as an agent of change to bring in a DITA implementation and create scalability within the department. Peggy lives in St. Paul and is raising four backyard chickens, Pearl, Lily, Chloe, and Pinky.
  • Recorded: July 20, 2017
    The OASIS DITA Adoption TC is pleased to announce Stan Doherty’s presentation on Integrating Markdown Into Your DITA 1.3 Pipeline. Stan will provide a step-by-step tutorial on how to supplement an out-of-the-box DITA 1.3 deployment with the software, templates, and processing logic required to author and integrate Markdown-encoded topics alongside your DITA topics and maps. Stan will provide a step-by-step tutorial on how to supplement an out-of-the-box DITA 1.3 deployment with the software, templates, and processing logic required to author and integrate Markdown-encoded topics alongside your DITA topics and maps.

    Presented by Stanley Doherty, Ph.D., HPE SimpliVity (Secretary for the OASIS DITA Adoption Technical Committee)

    Stan Doherty lives in the Boston area and works as a technical publications manager and Agile Product Owner at HPE SimpliVity. He participates as a voting member of the OASIS DITA Technical Committee, serves as secretary for the OASIS DITA Adoption Technical Committee, and supports companies in New England considering DITA. Feel free to contact Stan if you are considering DITA, DITA tools, and DITA-aware CCMSs.
  • Date: August 7, 2019 Gathering feedback from subject matter experts and other stakeholders is frequently a source of frustration for both content developers and SMEs alike. Whether you use the old “red pen” technique or circulate PDFs to your SMEs for comment and review, incorporating that feedback into your source content is time-consuming, labor-intensive, and error prone – not to mention difficult to track over time. In this webinar Chad Dybdahl, Adobe Solutions Consultant, will walk you through a highly collaborative workflow experience that allows you to:
    • Easily collect feedback from many stakeholders simultaneously, in real-time
    • Quickly import changes from reviewers back into your DITA source content
    • Accept and reject whose changes
    • Preserve trackability of the changes throughout the content lifecycle
      Presented by: Chad Dybdahl is a Solutions Consultant for Technical Communication at Adobe. Chad helps organizations around the world craft a vision for their content strategy with an eye towards future delivery platforms. Chad lives in Wisconsin with his wife, daughter, and two dogs. In his spare time, he enjoys tinkering with home automation, restoring vintage hi-fi equipment, and gardening.
  • Recorded: July 27, 2016 Over the last decade, corporate technical publications departments have invested heavily in migrating their content away from proprietary authoring and publishing tools (e.g., MSWord, Adobe FrameMaker) and implementing the DITA standard for content markup. These companies have invested millions of dollars into content conversion and implementation of DITA-based authoring and content management systems. In many ways, these DITA implementation projects have proven to be hugely successful, particularly with regards to content reuse and reduced cost of localizing content to multiple languages. However, one promise of DITA has often fallen short: the goal of true “single source publishing.” The majority of technical publications groups are still publishing to print as the primary output format, followed by online help, and in some cases, eBooks. But, one major gap is still present for most technical publishers: automated publishing to mobile devices. Even though smartphones and tablets have dominated the industry for the last several years, virtually no one is publishing content in a way that fully uses the native capabilities of these mobile devices. Instead, they are settling for the inherent limitations of PDF or HTML files. Dan Dube outlines 5 tips to help technical publishers go “the last mile” to fully leverage their DITA investment and deliver content to popular mobile device platforms like Apple iOS and Android. This webinar will also help to answer the burning question: “Why aren’t EPUB or PDF the best choices for delivering DITA content to a mobile device?” Presented by: Dan Dube, Compass Behavior Dan Dube is a seasoned veteran of the XML content management and publishing industry, with over 30 years of experience working with structured content and automated single-source publishing solutions. Dan is best known as the co-founder and former CEO of DocZone, the industry’s first cloud-based solution for XML authoring, content management, localization, and multichannel publishing. (DocZone was acquired by RSI in 2009.) Dan is now CEO and co-owner of Compass Innovative Behavior Strategies, a New England-based provider of behavior therapy services for individuals with autism and other developmental delays. He still maintains a presence in the publishing industry as an independent consultant.
  • Recorded: June 8, 2017
    In many industries there’s a shift taking place from the traditional product-focused model to a user focused model. It has become important to bring service information, such as user and maintenance manuals, to this new model as well to get the best possible user experience. This new model contributes to a lower downtime thanks to predictive maintenance, which is a result of IoT initiatives. In this webinar, Berry Braster of Etteplan will explain how business models are changing and what this means for technical communicators and documentation managers.

    Presented by Berry Braster, Etteplan

    Berry Braster is the Technology Director of Technical Documentation at Etteplan, a specialist in engineering, embedded systems, IoT, and technical documentation solutions with over 2500 employees worldwide. Berry has over 16 years of experience in the field of technical documentation and has assisted many global companies with their content strategies, effectively communicating technical information and applying universal standards for content, including Simplified Technical English and DITA.
  • April 30, 2019 Consumers have more avenues than ever before to find the content they need. Are you trying to decipher how content trends are impacting your business? Do you need to respond to a rapidly changing digital marketplace? Join us to discover how changing content development and delivery requirements are affecting your business today. Learn how others in the information-development community are planning to respond to new customer demands for innovative approaches to development and delivery. In its seventh year of collecting data, the Center for Information-Development Management (CIDM) and Data Conversion Laboratory (DCL) asked managers, information architects, writers, training developers, and more how they are addressing the challenges of meeting customer information needs. During the webinar we walk through the results of the 2019 Trends Survey, a study we have been conducting since 2012. We trace the changes in how we think about developing and delivering content. Presented by:  Dawn Stevens, President, Comtech Services and Director of CIDM has 28 years of practical experience in virtually every role within a documentation and training department, including project management, instructional design, writing, editing, and multimedia programming. Dawn is the perfect advisor to identify and remove the challenges you face in producing usable, technical information and training content. With both engineering and technical communication degrees, Dawn combines her solid technical foundation with strong writing and design skills to lead our team of consultants and specialists in providing the expertise you need. Mark Gross, President, Data Conversion Laboratory, is a recognized authority on XML implementation and document conversion. Mark also serves as Project Executive, with overall responsibility for resource management and planning. Prior to joining DCL in 1981, Mark was with the consulting practice of Arthur Young & Co. Mark has a BS in Engineering from Columbia University and an MBA from New York University. He has also taught at the New York University Graduate School of Business, the New School, and Pace University. He is a frequent speaker on the topic of automated conversions to XML and SGML.